Removing the Thermostatic Valve and Draining the Transmission Cooler Lines in an Aston Martin DB9

Probably the wordiest title to a Blog article yet – my apologies. What I am talking about is the Thermostatic control valve mounted to the Touchtronic II 6-speed Automatic Transmission fitted to most Aston Martin DB9’s, DBS and Rapides from 2004 to 2014. This valve controls the flow of hot automatic transmission fluid to the oil cooler/radiator mounted at the front of the car, regulating its temperature. You may need to remove the valve to service it, the oil cooler lines, or to remove the transmission oil pan/sump (like I am doing in my series on changing the automatic transmission fluid and seals – read about that here). The oil cooler lines hold about 1.6 liters of transmission fluid so you might want to drain those. Let me show you how to remove the valve and drain the lines. Continue reading “Removing the Thermostatic Valve and Draining the Transmission Cooler Lines in an Aston Martin DB9”

Draining the Automatic Transmission fluid from the Sump in an Aston Martin DB9

I wanted to change the Automatic Transmission fluid in my DB9 (check out my entire series on this in another article). Part of that process is to drain the fluid from the oil pan/sump. Keep in mind that just draining the fluid from the sump and then refilling what comes out is NOT all it takes to change all the fluid. In fact you’ll only be draining about 40% of the total amount of fluid in the transmission during this process. To get the other 60% you should really check out my entire series on this. Continue reading “Draining the Automatic Transmission fluid from the Sump in an Aston Martin DB9”

Removing the Right Hand Rear Exhaust Heat Shield from an Aston Martin DB9

If you are trying to access some of the components on the right hand side of the 6-speed Touchtronic II automatic transmission fitted to most Aston Martin DB9s, DBS and Rapides between 2004 and 2014 you’ll find you have almost no access. The exhaust pipe is very close, and Aston fitted a heat shield to protect the transmission. But, that heat shield is even closer to the transmission. If you remove it you finally have enough room to get some skinny fingers into those tight places and can get some work done. For me, I was working on Changing the Transmission fluid (of which I’ve done a complete series of articles on that you can find here). Let me show you how to remove the heat shield.

Continue reading “Removing the Right Hand Rear Exhaust Heat Shield from an Aston Martin DB9”

Removing the Rear Subframe Crossmember from an Aston Martin DB9

The Aston Martin DB9 has a very cool drivetrain support system. At the front the engine and suspension system is all mounted to a subframe. At the rear the transmission, differential and suspension system is mounted to a rear subframe. Connecting the Front and Rear is the ‘Torque Tube’ that comes off the back of the engine and links to the front of the transmission. All together you can literally drop the entire power train out of the car by disconnecting the subframes. Why talk about this now?

At the rear of the car if you need to do some work on the transmission or suspension, it’s all mounted to that rear subframe. One component of the rear subframe is a lower crossmember that links the bottom right and left sides together making it more rigid, and also providing something to mount the rear plastic aerodynamic undertray to. This article is about how to safely remove that crossmember so you can get to what you need to work on.

Continue reading “Removing the Rear Subframe Crossmember from an Aston Martin DB9”

Tools Needed to Change the Automatic Transmission Fluid in an Aston Martin DB9

I’ve just changed the Automatic Transmission Fluid on my DB9 after 15 years and 45K miles.  The process applies to other Aston’s like the DBS and Rapide fitted with the Touchtronic II 6-speed automatic transmission made by ZF.   I’ve prepared an entire series describing the whole process, and you can find the index article for that here. As part of that process I spend sometime determining which tools would be needed to get the work done, PLUS I discovered a few tools and supplies that will make the process much easier. I wanted to share that with you in this article.

Continue reading “Tools Needed to Change the Automatic Transmission Fluid in an Aston Martin DB9”

Parts Needed to Change the Automatic Transmission Fluid in an Aston Martin DB9

If you own an Aston Martin DB9, DBS, or Rapide from 2004 to about 2014 and it has an Touchtronic II  6-Speed automatic transmission, the official Aston Martin Service guide says the transmission is ‘Filled for Life’.  In another article I debunked this idea (read the full article here), and uncovered the transmission manufacturer lists the service interval as a more realistic 80,000 to 120,000 kms (50,000 to 75,000 miles) or eight (8) years at the longest.    If you have an Aston Martin made before 2011 you are likely due for an automatic transmission fluid change.   If you are interested in doing it yourself (as I am) then you’ll need to know what very specific parts to track down.  This article will point you at what you need and give you some options on where to get them.

Continue reading “Parts Needed to Change the Automatic Transmission Fluid in an Aston Martin DB9”

Changing the Transmission Fluid in an Aston Martin DB9

Hello readers. I’ve just released the epic 7 part video series (epic to me at least) on how to change the transmission fluid in a DB9 fitted with a 6-speed automatic Touchtronic II transmission. Most DB9, DBS and Rapide’s from 2004 to 2014 were fitted with this transmission.   

Continue reading “Changing the Transmission Fluid in an Aston Martin DB9”

Resetting the Time for Regular Service Warning using a Foxwell Scanner on an Aston Martin DB9

If you do your own annual maintenance on your DB9 or Vantage, part of the 1 year or 2 year service regime is resetting the warning message on the dash display.   In a previous article I’ve shown you how to manually reset the message using a combination of carefully timed button pushes (check out that article here).   But, if you own one of fancy Foxwell Technologies OBDII code readers like the NT510 (or newer) did you know you can do it with just the push of a button?   Let me show you how in this article. Continue reading “Resetting the Time for Regular Service Warning using a Foxwell Scanner on an Aston Martin DB9”

Replacing the A/C Side Window Demister Hose in an Aston Martin DB9

Heat destroys cars.   I live in the central valley of California, and where the summertime average temp is 92°F or more.   The sun & heat attacks the paint, the plastics, the wood, the leather and in particular kills the adhesives used to glue the parts together.   One day when I was washing my baby I opened the drivers door only to see what looked like her intestines hanging down in the foot well.  Ugh.  Upon closer inspection I found this was the remnants of Air Conditioning side window demister hose.   The spiral wound hose had completely delaminated and was now dangling like an old slinky from under the dash.   Fortunately it wasn’t very expensive to repair, and you can easily tackle it yourself.  Let me share a few tips on how. Continue reading “Replacing the A/C Side Window Demister Hose in an Aston Martin DB9”

How to Deodorize the Interior of an Aston Martin DB9

Cars develop a personality with age.  The early model Aston Martin DB9 and Vantages are reaching 10-15 years old now.  For many the new car smell has begun to fade away.  A ‘fresh’ DB9 is a terrific smell of leather.  But what happens to the smell with age?   Humans get into the space and mess it up.  Masking the odor with air fresheners is a shame and compounds one problem with another.  I learned how to get rid of the actual issue, and will share that with you here. Continue reading “How to Deodorize the Interior of an Aston Martin DB9”